Assessing the operating temperature of multi-junction solar cells with novel rear side layer stack and local electrical contacts

Sub-bandgap sunlight provides a source of heat generation in solar cells that is detrimental to performance, especially in space applications where heat dissipation is limited. In this work we assess the impact that an advanced rear-side contact scheme for multi-junction solar cells has on the cell temperature. Our results show that this scheme reduces the optical power absorption below the bandgap of germanium by 81% compared to a standard, full metallization design. Measurements of the electrical and thermal power fluxes performed in vacuum demonstrate that this lower near-infrared light absorption results in 8% less heat dissipated in the cell with the novel rear-side contact scheme when operating at 25 ºC. Modelling of the operating temperature for both cells when fully encapsulated with glass indicates that this effect will also result in a reduction of the operating temperature of 9 ºC for the novel design

A general approach for robust integrated polarization rotators

Integrated polarization rotators suffer from very high sensitivity to fabrication errors. A polarization rotator scheme that substantially increases fabrication tolerances is proposed. In the proposed scheme, two tunable polarization phase shifters are used to connect three rotator waveguide sections. By means of properly setting the polarization phase shifters, fabrication errors are compensated and perfect polarization rotation is achieved. Analytical conditions are shown that determine the maximum deviation that can be corrected with the proposed scheme. A design example is discussed, where the thermo-optic effect is used to provide the required tunable polarization phase shifting. Calculated 40dB extinction ratio is shown in presence of fabrication errors that would yield a 4dB extinction ratio in the conventional approach. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.The authors want to aknowledge Universidad de Málaga alaga, Campus de Excelencia Internacional Andalucia Tech for their support

Colorless devices and reception techniques for polarization multiplexed communications

Future optical networks call for flexible, high performance and low cost coherent optical receivers. We present here several advances towards such receivers, including integrated optical couplers with ultra-broad bandwidth, as well as novel reception techniques and architectures that will enable high performance coherent reception without filtering and polarization splitting elements.Universidad de Málaga - Campus de Excelencia Internacional Andalucía Tech. Spanish Ministry of Science under project TEC2013-46917-C2-1-

Contact transmission of influenza virus between ferrets imposes a looser bottleneck than respiratory droplet transmission allowing propagation of antiviral resistance

Influenza viruses cause annual seasonal epidemics and occasional pandemics. It is important to elucidate the stringency of bottlenecks during transmission to shed light on mechanisms that underlie the evolution and propagation of antigenic drift, host range switching or drug resistance. The virus spreads between people by different routes, including through the air in droplets and aerosols, and by direct contact. By housing ferrets under different conditions, it is possible to mimic various routes of transmission. Here, we inoculated donor animals with a mixture of two viruses whose genomes differed by one or two reverse engineered synonymous mutations, and measured the transmission of the mixture to exposed sentinel animals. Transmission through the air imposed a tight bottleneck since most recipient animals became infected by only one virus. In contrast, a direct contact transmission chain propagated a mixture of viruses suggesting the dose transferred by this route was higher. From animals with a mixed infection of viruses that were resistant and sensitive to the antiviral drug oseltamivir, resistance was propagated through contact transmission but not by air. These data imply that transmission events with a looser bottleneck can propagate minority variants and may be an important route for influenza evolution

IL-1R and inflammasomes mediate early pulmonary protective mechanisms in respiratory brucella abortus infection

Brucella spp. infection is frequently acquired through contaminated aerosols. The role of interleukin-1 beta (IL-1β) in the early pulmonary response to respiratory Brucella infection is unknown. As shown here, IL-1β levels in lung homogenates and bronchoalveolar lavage fluid (BALF) of mice intratracheally inoculated with B. abortus were increased at 3 and 7 days p.i. At 7 days p.i., pulmonary CFU numbers were higher in IL-1 receptor (IL-1R) knockout (KO) mice than in wild type (WT) mice. At different times p.i. CFU in lungs and BALF were higher in mice lacking some inflammasome components (caspase-1, AIM2, NLRP3) than in WT mice. At 2 days p.i. pulmonary levels of IL-1b and CXCL1 (neutrophils chemoattractant) were lower in caspase-1/11 KO mice. At day 3 p.i., neutrophils counts in BALF were lower in caspase-1/11 KO mice than in WT mice. During in vitro infections, IL-1β secretion was lower in alveolar macrophages from caspase-1/11, NLRP3 or AIM2 KO mice than in WT controls. Similarly, IL-1β production by B. abortus-infected alveolar epithelial cells was reduced by pretreatment with a specific caspase-1 inhibitor. This study shows that IL-1R, probably through IL-1β action, and the NLRP3 and AIM2 inflammasomes are involved in pulmonary innate immune protective mechanisms against respiratory B. abortus infection.Fil: Hielpos, María Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni; Argentina. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; ArgentinaFil: Fernandez, Andrea Giselle. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni; ArgentinaFil: Falivene, Juliana. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni; ArgentinaFil: Alonso Paiva, Iván Mathias. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni; ArgentinaFil: Muñoz González, Florencia. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni; ArgentinaFil: Ferrero, Mariana Cristina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni; ArgentinaFil: Campos, Priscila C.. Universidade Federal de Minas Gerais; BrasilFil: Vieira, Angelica T.. Universidade Federal de Minas Gerais; BrasilFil: Oliveira, Sergio Costa. Universidade Federal de Minas Gerais; BrasilFil: Baldi, Pablo Cesar. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Estudios de la Inmunidad Humoral Prof. Ricardo A. Margni; Argentin

INCORPORATING FIELD EFFECTS INTO THE DESIGN OF MODULAR PRODUCT FAMILIES

With advancing digitalization, new technologies with more and more digital components make it necessary to integrate new components into current and future products. Sensors and actuators, such as motors, emit electromagnetic and thermal fields that can greatly affect product performance. Recent work has considered fields at the functional level using functional structures and at the system level using DSM. In this paper, the effects of fields on product architecture are investigated at the component level. Using an appropriate visualization, the impact of fields on the product structure is considered. Architectural guidelines are then used to develop suitable product structures. The methodological approach is then applied to a product family of vacuum cleaner robots. The overlaid field information helps to gain deeper insights into the product architecture. The approach is useful for representing alternative structures. The new mapping of functional and structural relationships by moving module boundaries against fields can help promote architectural innovation